Sharp AR-350 - Manual (Page 86)

5-18
SADDLE STITCH FINISHER
Saddle stitch finisher functions
■ Sort mode
Each set will be sequentially printed and delivered.
Printouts Original
■ Group mode
All copies of the same page will be grouped.
Printouts Original
The offset tray moves from side to side so that each
set is offset from the previous set and each set can
be easily taken out. (The offset function operates
only in the offset tray.)
When the staple sort function is selected, the offset
function will not operate.
■ Offset mode
Offset mode Non-offset mode
Name Saddle stitch finisher
Stapling position Upper tray: two types (one at rear, one at front)
Lower tray: 4-47/64" (120 mm) pitch from the center of paper
Reference paper position Center
Power supply Drawn from the power supply unit (peripheral unit)(See page xx.)
Dimensions xx-x/x" (W) x xx-x/x" (D) x xx-x/x" (H) (xxx mm (W) x xxx mm (D) x xxx mm (H))
Weight Approx. xxx lbs. (xx kg)
Name Punch module
Number of punch holes/ 2 holes/x-x/x" or xx mm
hole diameter
Hole pitch x-x/x" or xx mm
Punching capacity xx sheets
Specifications are subject to change for improvement without notice.
Supplies
For the saddle stitch finisher, the following staple cartridge is needed as supplies.
● Staple cartridge (Approximately 2,000 staples x x)
xxxx