Sharp AR-350 - Manual (Page 96)

5-28
SADDLE STITCH FINISHER
Relation between print image and saddle stitch
When saddle stitch is performed, the orientation of image data or original is related to the orientation of paper
complicatedly. The table below shows the requirements of the image and the saddle stitch.
Same as above
Image data or original Result
First page
(front side)
Third page
(front side)
First page
(front side)
Third page
(front side)
Second page
(reverse side)
Fourth page
(reverse side)
Second page
(reverse side)
Fourth page
(reverse side)
Two sides
Two sides
Two sides
Two sides
Right
binding
Left
binding
Portrait
orientation
printing
Landscape
orientation
printing
NOTES
● Required settings for the illustration above are shown below.
* Available paper sizes are 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", A3, B4, A4, and B5 (stapling capacity is up to
50 sheets for 8-1/2" x 11", A4 and B5, and up to 25 sheets for other sizes).
* Portrait orientation or landscape orientation must be selected.
● Select only one paper size. If different sizes are included, stapling cannot be performed.
NOTE
Stapling cannot be performed onto the following types of paper.
Pre-punched paper, transparency film, heavy paper, label, envelope, Japanese postcard