Sharp AR-350 - Manual (Page 90)

5-22
SADDLE STITCH FINISHER
8 Insert the staple box.
Push the staple box until it
clicks into place.
9 Push back the stapler section.
■ Staple jam removal
1 Open the front cover.
2 Turn roller rotating knob C as shown in the
illustration until a blue indication is seen.
3 Remove the paper from the stapler
compiler.
4 Open the saddle stitch section cover (when
the saddle stitch function is used).
5 Remove the misfed paper.
6 Close the saddle stitch section cover.
7 Open the saddle stitch section cover (when
the saddle stitch function is used).
8 Turn roller rotating knob A in the direction
of the arrow to move the staple unit to your
side.
Blue
Roller rotating
knob C
10 Close the front cover.
NOTE
Execute test printing in the staple sort mode to ensure
that stapling is performed properly.
Roller rotating knob A
Staple unit