Headlamp high/low-beam changer, Flash-to-pass, Windshield wipers – Saturn 2009 VUE Hybrid User Manual

Page 109: Headlamp high, Low-beam changer

Advertising
background image

Have the bulbs replaced. If a bulb is
not burned out, check the fuse. See
Fuses and Circuit Breakers on
page 5-75
and for burned-out bulbs.

Headlamp High/
Low-Beam Changer

2 3

Headlamp High/Low Beam

Changer: Push the turn
signal/multifunction lever away from
you to turn the high beams on.

Pull the lever towards you to return
to low beams.

This indicator light turns on in the
instrument panel cluster when
the high beam headlamps are on.

Flash-to-Pass

This feature lets you use your
high-beam headlamps to signal a
driver in front of you that you want
to pass.

To flash the high beams
from low beam, pull the turn
signal/multifunction lever all the
way towards you. Then release it.

Windshield Wipers

The windshield wiper lever is
located on the right side of the
steering column.

Push up or pull down on the lever to
place it in one of the following
positions.

8

(Mist): For a single wiping

cycle. The lever returns to its
starting position when released. For
more cycles, hold the lever down
before releasing it.

9

(Off): Turns the wipers off.

&

(Intermittent): Sets a delay

between wipes. To set for a shorter
or longer delay between wipes,
move the switch on top of the lever
left or right to decrease or
increase wiper movement.

a

(Low): For slow, steady wiping

cycles.

1

(High): For rapid wiping cycles.

Clear ice and snow from the wiper
blades before using them. If the
wiper blades are frozen to the
windshield, gently loosen or thaw
them. If they become damaged,
install new blades or blade inserts.
See Windshield Wiper Blade
Replacement
on page 5-38.

Instrument Panel

3-7

Advertising