License plate lamp, Replacement bulbs, Service and appearance care 5-37 – Saturn 2009 VUE Hybrid User Manual

Page 257

Advertising
background image

1. Open the liftgate.

2. Remove the two screws holding

in the taillamp assembly.

3. Slide the taillamp assembly

rearward and away from the
vehicle.

4. Turn the bulb socket being

replaced counterclockwise
to disconnect it.

5. Pull the bulb out of the bulb

socket.

6. Push the new bulb into the

bulb socket.

7. Reverse Steps 2 through 4 to

reinstall the taillamp assembly.

License Plate Lamp

To replace one of these bulbs:

1. Remove the two screws holding

each of the license plate lamps
to the fascia.

2. Turn and pull the license plate

lamp forward through the
fascia opening.

3. Turn the bulb socket

counterclockwise and pull the
bulb straight out of the socket.

4. Push the new bulb into the bulb

socket and turn it clockwise to
lock it into place.

5. Push and turn the license plate

back through the fascia opening.

6. Reinstall the two screws holding

the license plate lamps to the
fascia.

Replacement Bulbs

Exterior Lamp

Bulb

Number

Back-up Lamp

3156

Front Turn
Signal/Parking

3157K

Headlamps

High-beam

9005 or

HB3

Low-beam/DRL

9006 or

HB4

Rear Turn Signal,
Stoplamp and
Taillamp

3057

For replacement bulbs not listed
here, contact your dealer/retailer.

Service and Appearance Care

5-37

Advertising