Instrument panel brightness, Dome lamp, Entry lighting – Saturn 2009 VUE Hybrid User Manual

Page 116: Reading lamps, Electric power management, Instrument panel, Brightness, Electric power, Management

Advertising
background image

Instrument Panel
Brightness

This feature controls the brightness
of the instrument panel lights.

The thumbwheel for this feature is
located on the left side of the
steering wheel next to the exterior
lamps control.

Turn the thumbwheel to the right or
left to brighten or dim the lights.

Dome Lamp

*

(Dome Lamp Override): Press

this button to keep the dome
lamps and other interior lamps
turned off while any door is open.
Press this button again to return it to
the out position and the lamps
automatically come on when any
door is opened.

+

(On/Off): Press this button to

turn the dome lamps on and off
while the doors are closed.

Entry Lighting

If the dome lamp override button is
in the out position, the lamps
inside the vehicle automatically
come on when any door is opened
or when the Remote Keyless
Entry (RKE) unlock button is
pressed. After the door is opened
the lights remain on and stay on for
20 seconds after the doors are
closed, or until the key is put into
the ignition and turned to the

ACC/ACCESSORY position. The
lights will then gradually dim until it
is no longer lit.

Reading Lamps

The reading lamps are located on
the overhead console.

To turn the reading lamps on or off,
press the button located next to
each lamp.

Electric Power
Management

The vehicle has Electric Power
Management (EPM) that estimates
the battery’s temperature and
state of charge. It then adjusts the
voltage for best performance
and extended life of the battery.

When the battery’s state of charge is
low, the voltage is raised slightly to
quickly bring the charge back up.
When the state of charge is high, the
voltage is lowered slightly to prevent
overcharging. If the vehicle has a
voltmeter gage or a voltage display

3-14

Instrument Panel

Advertising