Saturn 2009 VUE Hybrid - Manual (Page 13)

Rear Seats
Split Folding Rear Seat
The rear split bench seatbacks can
be folded forward, upright, or
partially reclined, independent of the
other seatback position.
{ CAUTION
If either seatback is not locked, it
could move forward in a sudden
stop or crash. That could cause
injury to the person sitting there.
Always push and pull on the
seatbacks to be sure they are
locked.
{ CAUTION
A safety belt that is improperly
routed, not properly attached, or
twisted will not provide the
protection needed in a crash. The
person wearing the belt could be
seriously injured. After raising the
rear seatback, always check to be
sure that the safety belts are
properly routed and attached, and
are not twisted.
To fold the seatback down:
Notice: Folding a rear seat with
the safety belts still fastened may
cause damage to the seat or the
safety belts. Always unbuckle the
safety belts and return them to
their normal stowed position
before folding a rear seat.
1. Unbuckle all three safety belts
and put the front seatback in
an upright position.
2. Lift the lever located on the top
of the seatback to release the
seatback and fold the seatback
forward.
To recline the seatback:
1. Lift and hold the lever located on
top of the seatback.
2. Tilt the seatback rearward, then
release the lever.
Seats and Restraint System 1-9