Samsung SHR-3040 - Manual (Page 21)

English _1
!
live
searcH
You can perform the search for recorded data by the time or by the search criteria such as an event.
Press the [searcH] button on the remote control, or click
<
> in the Launcher menu.
The Search menu appears.
Use the direction buttons on the remote control or the front
panel, or use the cursor to select one from menu items of
Percent, Date/Time, and Event.
Specify search criteria for each item and click <Play> in the
lower screen.
The selected video data will be played.
To return to the previous menu, click < ESC>.
You can also move the wheel of the mouse up or down to increase or decrease the setting value.
Percent search
You can select a start point in the percent bar showing the
amount of recorded data in the HDD.
Use the cursor to select a desired point in the section bar, or
use the [+/-] button on the remote control, or the left/right
button of the mouse to specify the percent (“%”).
Right-click will decrease the number; Left-click will increase the
number.
Date/time search
You can search for data by the date and time.
If you select <Date/time searcH>, the start and end times
will be listed.
The time point that you set in <tarGet> will be displayed in
the list.
If you specify a time point out of range, an error message of < INPUT
DATE TIME ERROR> will be displayed.
1.
.
.
`
`
`
`
SEARCH
PERCENT SEARCH
DATE/TIME SEARCH
EVENT SEARCH
EXIT
PERCENT SEARCH
START 2009/ 05/01 00:00:06
END 2009/ 05/01 00:00:20
TARGET 2009/ 05/01 00:00:06
PERCENT 92%
PLAY ESC
DATE/TIME SEARCH
START 2009/ 05/01 00:00:06
END 2009/ 05/01 00:00:20
TARGET 2009/ 05/01 00:00:06
PLAY ESC
02489A_SHR-3040_ENG.indb 21 2009-11-10 오후 2:13:26