Samsung SHR-3040 - Manual (Page 23)

English _
!
live
eveNt mONitOriNG
This will display a specifi c event such as alarm and event on the screen of each channel.
The event will be displayed regardless of the schedule setting.
to set the event update
Specify a time in “maiN meNu > cONFiGuratiON >
iNterval setuP > eveNt uPDate”.
Set the time between 10 and 990 seconds by the 10
seconds.
For more information, refer to “ INTERVAL SETUP”. (Page 33)
If an event specifi ed in the recording schedule occurs, the
event update will be made.
For more information, refer to “ SCHEDULE SETUP”. (Page 29)
A video loss event will be updated only while recording is in process.
An alarm list will be updated only if the recording schedule has been set to Alarm.
A motion event will be updated only if the recording schedule has been set to Motion.
Alarm and motion events will be updated only if the recording schedule has been set to Alarm + Motion.
to update the event list
Ex) If you set the event update interval to 10 seconds, the next event will be updated in at least 10 seconds.
1.
`
.
`
~
~
~
~
`
Event Occurs Event Ends Event Occurs
Updates the event list Updates the event list
Event Occurs
Ignore list registration
10 seconds
INTERVAL SETUP
DEFAULT ESC
SEQUENCE SCREEN 01 SEC
PIP SCREEN 01 SEC
EVENT UPDATE 600 SEC
OK
02489A_SHR-3040_ENG.indb 23 2009-11-10 오후 2:13:29