Samsung SHR-3040 - Manual (Page 44)

_ setup
setup
Firmware uPGraDe
You can upgrade the DVR fi rmware with the latest version.
upgrade
Press the [meNu] button on the front panel or remote
control.
The “Dvr lOG-iN” dialog appears.
Enter the password and select <eNter>.
The “maiN meNu” screen appears.
Use the up/down ($%) button to select <Firmware
uPGraDe>, and press [OK].
The “Firmware uPGraDe” screen appears.
Connect the USB device that stores upgradeable fi les.
Select <cHecK usB>.
If there founds any upgradeable fi le, select <uPGraDe>.
After the login process, the DVR will perform the upgrade
step by step.
When done, restart the player.
During the fi rmware upgrade, recording will be stopped and
the Live screen in the viewer may skip.
As the player performs upgrade with the fi rst one if there is
more than one upgradeable fi le in the USB device, so ensure
that there should be only one upgrade fi le in the USB device.
1.
.
.
.
.
.
.
.
J `
`
MAIN MENU
EXIT
DISPLAY SETUP
RECORD
CONFIGURATION
EXTERNAL DEVICE
BACK-UP
FIRMWARE UPGRADE
FACTORY DEFAULT
LANGUAGE ENGLISH
SHUTDOWN
FIRMWARE UPGRADE
CHECK USB UPGRADE ESC
CURRENT VER V0.14_090611N
UPGRADE VER
FILE:
FIRMWARE UPGRADE
CHECK USB UPGRADE ESC
CURRENT VER V0.14_090611N
UPGRADE VER V0.14_090611N
FILE: SHR-3040_V0.14_090611N.BIN
YOU ARE TRYING TO UPGRADE THE FIRM-
WARE WITH SAME OR PREVIOUS VERSION.
PRESS UPGRADE
02489A_SHR-3040_ENG.indb 44 2009-11-10 오후 2:14:00