Setup, Motion setup, Alarm setup – Samsung SHR-3040 User Manual

Page 32

Advertising
background image

_

setup

setup

motion setup

You can specify an area to detect a motion.

If you select an area to detect a motion, the DVR will detect any motion occurring in that area.
See the previous section to repeat steps 1~3. (Page 30)

Use the up/down ($%) button to select <mOtiON

setuP>, and press [OK].

The “mOtiON setuP” screen appears.

Use the up/down ($%) button to move to a desired item.

CHANNEL: Select a channel to set the motion detection.
SENSITIVITY: Adjust the sensitivity of the motion detection.

If the level increases from 1 to 6 one by one, the sensitivity

will be increased accordingly.
DURATION: Set the recording duration from the moment a motion is

detected. You can specify the duration between 2 and 99 seconds.
SIZE: Specify the number of cells to be selected at once.

Ex) If you select 3, a total of 9 cells (3X3) will be selected.

Use the four direction ($%_ +) buttons and press [OK]

to set the motion area.

Motion detection is activated for the area that is selected in red.

By default, all cells are set to disabled.
If you use the cursor to set the motion area, select a cell and set it to ‘ACTIVE/INACTIVE’.

Left-click a cell and drag it until a desired cell block is shaped.

When a desired block is selected, release the left button of the mouse.

When done, select <OK>.

Your setting will be applied.

If you select <DeFault>, the selected channel will be reset to the default, and if selecting <all-DeFault>, all

the channels will be reset to the factory default.
To return to the previous menu, select <esc>.

alarm setup

You can set the input system of the alarm that is connected to the DVR.
See the previous section to repeat steps 1~3. (Page 30)

Use the up/down ($%) button to select <alarm

setuP>, and press [OK].

The “alarm setuP” screen appears.

.

.

~
~

~

~

.

`
`

.

.

.

CONFIGURATION

ESC

HDD MANAGEMENT
CAMERA SETUP
MOTION SETUP
ALARM SETUP
INTERVAL SETUP
DATE/TIME SETUP
PASSWORD SETUP
BUZZER SETUP

CONFIGURATION

ESC

HDD MANAGEMENT
CAMERA SETUP
MOTION SETUP
ALARM SETUP
INTERVAL SETUP
DATE/TIME SETUP
PASSWORD SETUP
BUZZER SETUP

MOTION SETUP

DEFAULT

ALL-DEFAULT

ESC

CHANNEL

SENSITIVITY

DURATION

SIZE

OK

CH1

6

05

2

02489A_SHR-3040_ENG.indb 32

2009-11-10 오후 2:13:43

Advertising