Record, Record setup, Setup – Samsung SHR-3040 User Manual
Page 28
_
setup
setup
Use the up/down ($%) button to set the “tOP OsD
OFFset”.
The icon bar in the upper corner of the Live screen will be
removed up or down.
When done, select <OK>.
Your setting will be applied.
If you select <DeFault>, the settings will be restored to
the factory default.
To return to the previous menu, select <esc>.
recOrD
You can confi gure the record and recording schedule settings.
record setup
You can set options of the record quality, frame rate and pre alarm record.
Press the [meNu] button on the remote control or the
front panel.
The “Dvr lOG-iN” dialog appears.
Enter the password and select <eNter>.
The “maiN meNu” screen appears.
Use the up/down ($%) button to select <recOrD>, and
press [OK].
The “recOrD” setting screen appears.
Use the up/down ($%) button to select <recOrD
setuP>, and press [OK].
The “recOrD setuP” screen appears.
Use the up/down ($%) button to move to a desired item.
QUALITY: Select the quality from Highest, High and
Normal.
The remaining time will change according to the quality.
FRAME RATE: Set the frame rate per second.
The higher the frame rate is, the more natural the video
becomes but the remaining recordable time will be
shortened.
.
.
.
1.
.
.
.
.
~
~
OSD SETUP
TOP OSD OFFSET
0
OK
DEFAULT
ESC
MAIN MENU
EXIT
DISPLAY SETUP
RECORD
CONFIGURATION
EXTERNAL DEVICE
BACK-UP
FIRMWARE UPGRADE
FACTORY DEFAULT
LANGUAGE
ENGLISH
SHUTDOWN
RECORD
ESC
RECORD SETUP
SCHEDULE SETUP
RECORD SETUP
DEFAULT
ESC
QUALITY
HIGH
FRAME RATE
30 FPS
PRE ALARM RECORD
OFF
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
HDD REMAINING
236GB/320GB
TIME REMAINING
D-14 H-11 M-25
OK
02489A_SHR-3040_ENG.indb 28
2009-11-10 오후 2:13:36