Samsung SHR-3040 - Manual (Page 41)

English _1
!
setuP
audio setup
You can adjust the I/O volume for the channel.
During video recording, sound from the selected channel will be recorded as well.
See the previous section to repeat steps 1~3. (Page 36)
Use the up/down ($%) button to select <auDiO
setuP>, and press [OK].
The “auDiO setuP” screen appears.
Use the up/down ($%) button to move to a desired item.
CHANNEL: Select a channel that will be connected to
the audio input. If you set it to <OFF>, the audio icon will
be grayed out and no audio data will be recorded.
INPUT VOLUME: Specify the audio input gain. If you
specify <00> for the volume, the audio sound will be
mute.
OUTPUT VOLUME: Specify the audio output gain.
The audio output will be available only through the speaker.
It is recommended to install powered speakers (with the built-in amplifi er) if the audio output level is weak depending
on the use environment.
When done, select <OK>.
Your setting will be applied.
If you select <DeFault>, the settings will be restored to the factory default.
To return to the previous menu, select <esc>.
spot setup
Apart from the Live screen, you can use the spot monitor to monitor a specifi c channel through the SPOT
OUT port.
See the previous section to repeat steps 1~3. (Page 36)
Use the up/down ($%) button to select <sPOt setuP>,
and press [OK].
The “sPOt setuP” screen appears.
.
.
~
~
~
J `
.
.
.
EXTERNAL DEVICE
ESC
TCP/IP SETUP
PTZ SETUP
MOUSE SETUP
AUDIO SETUP
SPOT SETUP
AUDIO SETUP
DEFAULT ESC
CHANNEL CH1
INPUT VOLUME 15
OUTPUT VOLUME 03
OK
EXTERNAL DEVICE
ESC
TCP/IP SETUP
PTZ SETUP
MOUSE SETUP
AUDIO SETUP
SPOT SETUP
02489A_SHR-3040_ENG.indb 41 2009-11-10 오후 2:13:56