Sony SNC-VL10P - Manual (Page 12)

Op
er
at
ions
b
y
Us
e
rs
Monitoring the Image from the Camera
12
Focus Area
Use this function to focus on a portion of the monitor
image by masking over the other portion. The focused
portion is called “forcus area.” By masking the image,
the transmitting data size reduces and a higher frame
rate is obtained.
New Area
To determine a new focus area on the image, click New
Area. Then drag the mouse to make a dotted frame on
the area you want to set as the focus area and left-click.
A new focus area is now set.
Enable Area
Click Enable Area to show the check mark to enable the
focus area and mask over the non-focus area.
Disable Area
Click Disable Area to show the check mark to remove
the masking and resume the normal image.
Masking Level
Selects the masking level from Level 1 to Level 5. A
higher masking level gives a larger masking density and
higher frame rate.
Note
Some of the focus area functions might not be operative
depending on the viewer in use.
Image Quality
Selects the image quality from Level 0 to Level 9. A
higher level gives a higher quality image but the frame
rate becomes lower.
Note
Image Quality does not appear in the menu when you
view the monitor image using the Firewall viewer.
Capture
When you click Capture, the monitor image freezes and
the “Saving” dialog appears. Type the file name, select
the file format, specify the destination to which the file
is to be stored, and click Save.
This function is the same as when you click the Capture
icon on the image control section. (See “Capturing the
monitor image” on page 11.)
Note
Capture does not appear in the menu when you view the
monitor image using the Java Applet viewer.
Focus area