Sony SNC-VL10P - Manual (Page 32)

Ot
he
rs
Connecting the Camera to a Network
32
Connection Using an Inline Power
Hub
This camera supports the Inline Power system to supply
the power via the Ethernet cable. To supply the power
to the camera, connect it to a network using the Inline
Power Hub conforming to IEEE802.3af.
1
Select Ethernet in the setup program or select
LAN on Select Network Interface on the Network
Setting page for the Administrator, and set the items
for the LAN connection.
For details on the settings, see “LAN” on page 18.
For the use of the setup program, see “Assigning the
IP Address Using the Setup Program” in the
supplied Quick Reference.
2
Connect the camera to the network as follows:
Note
For details on the Inline Power Hub connection, refer to
the operation manual of the hub.
Ethernet cable
(not supplied)
Inline Power Hub
Network
SNC-VL10P
10BASE-T
10BASE-T
Sony Corporation