SimpleTech ZeusIOPS - Manual (Page 18)

18 Zeus IOPS 3.5-Inch Fibre Channel Solid State Drive Product Manual Rev. 1.0
A
UDIENCE
This manual is intended for system engineers or system designers employed by an Original
Equipment Manufacturer (OEM). This product manual was therefore written specifically for a
technically advanced audience; it is not intended for end-users that will eventually purchase the
commercially available product. The user, as referenced throughout this manual, is primarily
concerned with industrial, commercial or military applications.
S TANDARDS AND R EFERENCE D OCUMENTS
This section discusses the formal standards that may apply to the Zeus IOPS 3.5-inch Fibre Channel
SSD, including electrical product standards. In addition, this section lists reference documents
relevant to the FC-AL and FCP-SCSI protocols used for the Zeus
IOPS 3.5-inch Fibre Channel SSD.
S TANDARD F EATURES
This section lists the standard features of the Zeus IOPS 3.5-inch Fibre Channel SSD.
P RODUCT D ESCRIPTION
This section provides a general description of the Zeus
IOPS
3.5-inch Fibre Channel SSD, and
includes media, performance, reliability and capacity information.
P ERFORMANCE C HARACTERISTICS
This section describes the internal characteristics of the SSD and includes information on the access
execution times.
E LECTRICAL S PECIFICATIONS
This section describes the power requirements and power consumption parameters of the Zeus
IOPS
3.5-inch SSD.
I NTERFACE S PECIFICATIONS
This section provides a table of the connector pinout and tables of the electrical characteristics for
the pin signals. In addition, this section describes how the drive uses the pin signals when interacting
with the host system.
CAUTION: This device can be damaged by Electrostatic
Discharge (ESD). When handling the device, always wear a
grounded wrist strap and use a static dissipative surface.
Any damage to the drive that occurs after its removal from the
shipping package and ESD protective bag is the
responsibility of the user.