SimpleTech ZeusIOPS - Manual (Page 19)

Zeus IOPS 3.5-Inch Fibre Channel Solid State Drive Product Manual Rev. 1.0 19
FC-AL F EATURES
This section discusses issues related to the FC-AL ports and loop addressing of the Zeus
IOPS
3.5-
inch Fibre Channel SSD. This section also provides a table of the SCSI commands implemented on
the Zeus IOPS 3.5-inch Fibre Channel SSD, followed by subtopic discussing the use of each
command.
F IBRE C HANNEL S TANDARD
This section discusses the implementation of the Fibre Channel Arbitrated Loop (FC-AL) specific to
the Zeus
IOPS 3.5-inch Fibre Channel SSD.
I NSTALLATION
This section discusses issues relating to the installation of the SSD in a server or other enclosure,
including cooling and grounding.
R EGULATORY C OMPLIANCE
This section provides an overview of the marking, approval, documentation and reporting
conventions for the Zeus
IOPS 3.5-inch Fibre Channel SSD.
S TANDARDS AND R EFERENCE D OCUMENTS
This section discusses various standards for electronic products, and how those standards apply to
the Zeus
IOPS 3.5-inch Fibre Channel SSD.
E LECTROMAGNETIC S USCEPTIBILITY
The Zeus
IOPS
3.5-inch Fibre Channel SSD is intended for installation by the user in an appropriate
enclosure, i.e., a server or alternate enclosure. The enclosure must be designed so that the use of
the drive does not impair nearby electronic equipment within the same enclosure and external to the
enclosure.
The user is responsible for choosing, designing and testing the enclosure so that it is appropriate as
previously defined, and complies to related regulations, such as Subpart B of Part 15 of FCC Rules
and Regulations, and the Radio Interference Regulations of the Canadian Department of
Communications.