C.2.2 wiring conventions, Appendix c - cables – Sagem SAGEMFAST 1500WG User Manual
Page 123
Appendix C - Cables
SAGEM F@st™ 1500 Reference Manual - 288053220-04
Reproduction and communication prohibited without the written permission of
E
E
E
E
Page C-5
C.2.2 Wiring
Conventions
For ADSL connections, a cable requires one pair of wires. Each wire is identified by different
colors. For example, one wire might be red and the other, red with white stripes. Also, an RJ-11
connector must be attached to both ends of the cable.
Each wire pair must be attached to the RJ-11 connectors in a specific orientation. The following
figure illustrates how the pins on the RJ-11 connector are numbered. Be sure to hold the
connectors in the same orientation when attaching the wires to the pins.
Figure C.2 - RJ-11 Connector Pin Numbers
Figure C.3 - RJ-11 Pinouts
Pin
Signal Name
Wire Color
1
Not used
_
2
Line 2 Tip
Black or White/Orange
3
Line 1 Ring
Red or Blue/White
4
Line 1Tip
Green or White/Blue
5
Line 2 Ring
Yellow or Orange/White
6
Not used
_