Sagem SAGEMFAST 1500WG - Manual (Page 19)

2 - Description and physical installation
SAGEM F@st™ 1500 Reference Manual - 288053220-04
Reproduction and communication prohibited without the written permission of E E E E Page 2-7
2.3 Settings and Connecting
2.3.1 ISP settings
Please collect the following information from your ISP before setting up the
SAGEM F@st
TM 1500 ADSL Router :
• ISP account user name and password,
• Protocol, encapsulation and VPI/VCI circuit numbers,
• DNS server address,
• IP address, subnet mask and default gateway (for fixed IP users only).
2.3.2 Install the SAGEM F@st TM 1500 ADSL Router
The SAGEM F@st TM 1500 ADSL Router can be positioned at any convenient location in your
office or home. No special wiring or cooling requirements are needed. You should, however,
comply with the following guidelines:
• Keep the SAGEM F@st TM 1500 ADSL Router away from any heating devices.
• Do not place the SAGEM F@st TM 1500 ADSL Router in a dusty or wet environment.
You should also remember to turn off the power, remove the power cord from the outlet, and
keep your hands dry when you install the SAGEM F@st
TM 1500 ADSL Router.
2.3.3 Connect the ADSL Line
Connect the supplied RJ-11 cable from the ADSL Microfilter/Splitter to the ADSL port on your
SAGEM F@st
TM 1500 Router. When inserting an ADSL RJ-11 plug, be sure the tab on the plug
clicks into position to ensure that it is properly seated.