Sagem SAGEMFAST 1500WG - Manual (Page 51)

4 - Configuring the SAGEM F@st™ 1500 ADSL router
SAGEM F@st™ 1500 Reference Manual - 288053220-04
Reproduction and communication prohibited without the written permission of E E E E Page 4-5
Making Configuration Changes
Configurable parameters have a dialog box or a drop-down list. Once a configuration change
has been made on a page, click the “SAVE SETTINGS” or “NEXT” button at the bottom of the
page to enable the new setting.
To ensure proper screen refresh after a command entry, be sure that Internet
Explorer 5.0 is configured as follows:
Under the menu Tools/Internet Options/General/Temporary Internet Files/Settings,
the setting for “Check for newer versions of stored pages” should be “Every visit to
the page”.
Some new settings require a “Save & Reboot” process to store the modifications in
the flush memory. You can click the “Save & Reboot” button at the top of page.
This section on the left of the Home screen contains the following menus:
¾ STATUS (see section 4.1),
¾ SETUP WIZARD (see section 4.2),
¾ SYSTEM (see section 4.3),
¾ WAN (see section 4.4),
¾ LAN (see section 4.5),
¾ WIRELESS (see section 4.6),
¾ NAT (see section 4.7),
¾ FIREWALL (see section 4.8),
¾ ROUTE (see section 4.9),
¾ QoS (see section 4.10),
¾ ADVANCED (see section 4.11).
On the Home screen, you can choose the language in which the HTTP pages will be
displayed by clicking the appropriate flag (French or English).
By default, the language in use is English.