Sagem SAGEMFAST 1500WG - Manual (Page 31)

3 - Configuring Client Computer
SAGEM F@st™ 1500 Reference Manual - 288053220-04
Reproduction and communication prohibited without the written permission of E E E E Page 3-7
Obtain IP Settings from SAGEM F@st TM 1500 ADSL Router
Now that you have configured your computer to connect to your SAGEM F@st TM 1500 ADSL
Router, it needs to obtain new network settings. By releasing old DHCP IP settings and
renewing them with settings from your SAGEM F@st
TM 1500 ADSL Router, you can also verify
that you have configured your computer correctly.
1) On the Windows desktop, click Start/Run...
2) Type “WINIPCFG” and click OK. It may take a second or two for the IP Configuration
window to appear.
3) In the IP Configuration window, select your network card from the drop-down menu. Click
Release and then click Renew. Verify that your IP address is now 192.168.2.xxx, your
Subnet Mask is 255.255.255.0 and your Default Gateway is 192.168.2.1. These values
confirm that your SAGEM F@st
TM 1500 ADSL Router is functioning. Click OK to close the
IP Configuration window.