Sagem SAGEMFAST 1500WG - Manual (Page 33)

3 - Configuring Client Computer
SAGEM F@st™ 1500 Reference Manual - 288053220-04
Reproduction and communication prohibited without the written permission of E E E E Page 3-9
2) Double-click the Network icon.
3) In the Network window, select the Protocols tab. Double-click TCP/IP Protocol.
4) When the Microsoft TCP/IP Properties window open, select the IP Address tab.
5) In the Adapter drop-down list, be sure your Ethernet adapter is selected.
6) If “Obtain an IP address automatically” is already selected, your computer is already
configured for DHCP. If not, select this option and click “Apply.”
7) Click the DNS tab to see the primary and secondary DNS servers. Record these values,
and then click “Remove.” Click “Apply”, and then “OK.