Sagem SAGEMFAST 1500WG - Manual (Page 134)

Appendix E - Default configuration
SAGEM F@st™ 1500 Reference Manual - 288053220-04
Page E-2
Reproduction and communication prohibited without the written permission of E E E E
This section gives the default factory settings for the SAGEM F@st™ 1500. The
SAGEM F@st™ 1500 is set to "Router" mode by default.
These default settings can be modified by a special pre-configuration of the
SAGEM F@st™ 1500.This can be performed through CLI Telnet default commands.
E.1 Default user name and password for HTTP access
Password Empty
E.2 Default language for HTTP User Interface
Language used to display HTTP pages: English
E.3 Default configuration on the local area network side
LAN characteristics Function - Mode State/Value
IP characteristics IP address 192.168.2.1
Mask 255.255.255.0
BROADCAST, ARP, MULTICAST Enabled
IP - SERVICES RIP Disabled
DHCP server activated on the LAN 192.168.2.2 to 192.168.2.254
Default VLAN1 binding
characteristics VLAN1 binding LAN1, LAN2, LAN3, LAN4,
WLAN
Description Default
IP address 192.168.2.1
Subnet Mask 255.255.255.0
NAT Domain Private
IGMP Snooping Disabled
Default VLAN1 profile
characteristics
IGMP Querier Disabled
SSID broadcasting Enabled
ESSID "SAGEM"
Channel 6
WEP Disabled
"Wireless" characteristics
Only
SAGEM F@st
TM 1500WG
Keys 64 bits / Hex / Key1
(01/01/01/01/01)