Sagem SAGEMFAST 1500WG - Manual (Page 17)

2 - Description and physical installation
SAGEM F@st™ 1500 Reference Manual - 288053220-04
Reproduction and communication prohibited without the written permission of E E E E Page 2-5
2.2 Physical Installation
2.2.1 Installation instructions
Environment
¾ The SAGEM F@st™ 1500 must be installed and used inside a building.
¾ The room temperature must not exceed 45°C.
¾ The SAGEM F@st™ 1500 must be placed on a desktop.
¾ The SAGEM F@st™ 1500 must not be exposed to strong sunlight or excessive heat.
¾ The SAGEM F@st™ 1500 must not be placed in an environment subject to significant
steam condensation.
¾ The SAGEM F@st™ 1500 must not be exposed to splashed water.
¾ The SAGEM F@st™ 1500 casing must not be covered.
¾ The SAGEM F@st™ 1500WG and its peripheral devices must not be used for outdoor
transmissions.
Power supply source
¾ The SAGEM F@st™ 1500's mains adapter block must not be covered.
¾ The SAGEM F@st™ 1500 router is supplied with its own power supply adapter. It must not
be used with any other adapter.
¾ This Class II adapter does not need to be earthed. The connection to the electrical network
must comply with the information on its label.
¾ Use a readily accessible mains outlet near to the router. The power supply lead is 2 m long.
¾ Arrange the power supply lead to avoid any accidental disconnection of the power supply to
the router.
¾ The SAGEM F@st™ 1500 is designed for connection to a TT or TN system power supply
network.
¾ The SAGEM F@st™ 1500 is not designed for connection to an IT system electrical
installation (power supply with separate neutral).
¾ Protection against short circuits and leaks between phase, neutral and earth must be
provided by the building's electrical installation. The power circuit for this equipment must be
fitted with 16 A overcurrent protection and differential protection.
¾ The mains connection must be via a readily accessible, switched wall socket.
Maintenance
¾ The casing must not be opened. This must be done only by personnel qualified and
approved by your supplier.
¾ Do not use liquid or aerosol cleaning agents.
¾ Never open the mains adapter block; this can expose you to mortal danger.