Sagem SAGEMFAST 1500WG - Manual (Page 74)

4 - Configuring the SAGEM F@st™ 1500 ADSL router
SAGEM F@st™ 1500 Reference Manual - 288053220-04
Page 4-28
Reproduction and communication prohibited without the written permission of E E E E
4.6.4 WEP
If you want to use WEP to protect your wireless network, you need to set the same parameters
for the SAGEM F@st™ 1500 ADSL Router and all your wireless clients.
Parameter Description
WEP Mode Key Provisioning Select 64 bit or 128 bit key to use for encryption.
Select Static if there is only one fixed key for encryption. If you want to
select Dynamic, you would need to enable 802.1x function first.
You may automatically generate encryption keys or manually enter the keys. To generate the
key automatically with passphrase, check the Passphrase box, enter a string of characters.
Select the default key from the drop down menu. Click “Apply”.
The passphrase can consist of up to 32 alphanumeric characters. To manually
configure the encryption key, enter five hexadecimal pairs of digits for each 64-bit
key, or enter 13 pairs for the single 128-bit key (A hexadecimal digit is a number
or letter in the range 0-9 or A-F). Note that WEP protects data transmitted
between wireless nodes, but does not protect any transmissions over your wired
network or over the InternetSAGEM @st™ 1500 ADSL Router using Internet
Explorer 5.0 or above.