Sagem SAGEMFAST 1500WG - Manual (Page 94)

4 - Configuring the SAGEM F@st™ 1500 ADSL router
SAGEM F@st™ 1500 Reference Manual - 288053220-04
Page 4-48
Reproduction and communication prohibited without the written permission of E E E E
4.9 Route
These pages define routing related parameters, including static routes and RIP (Routing
Information Protocol) parameters.
In this menu is included the following sub-menus:
¾ Static Route (see section 4.9.1),
¾ RIP (see section 4.9.2),
¾ Routing Table (see section 4.9.3).
4.9.1 Static Route
Click “Add” to add a new static route to the list, or check the box of an already entered route
and click “Modify”. Clicking “Delete” will remove an entry from the list.
Parameter Description
Index Check the box of the route you wish to delete or modify.
Network Address Enter the IP address of the remote computer for which to set a static route.
Subnet Mask Enter the subnet mask of the remote network for which to set a static route.
Gateway Enter the WAN IP address of the gateway to the remote network.