To use the sunfddi/p proxy agent (pf_fddismt7_2), To specify the target station, To use the sunfddi/p proxy agent – Sun Microsystems 1.0 User Manual
Page 138: Pf_fddismt7_2
112
SunFDDI/P 1.0 Adapter User’s Guide—May 1997
9
▼ To Use the SunFDDI/P Proxy Agent (
pf_fddismt7_2
)
The SunFDDI/P proxy agent (
pf_fddismt7_2
) responds to SNM requests
from the console and issues SMT Request Frames (SRF) to a specified target
station. It then returns the information received from the target station in
response to the request. The basic operation of the SunFDDI/P proxy agent is
shown in Figure 9-3.
Figure 9-3
SunFDDI/P Proxy Agent
▼
To Specify the Target Station
1. Specify the target machine when you enable the SunFDDI/P proxy agent
in the properties window for the proxy station.
2. Use the scroll bar to display the two SunFDDI/P agents as shown in
Figure 9-4 and enter the host name of the target station on the input line.
Figure 9-4
Specifying the Target Station
SNM console
RPC request
RPC response
Proxy station
SMT request
SMT response
Target station