Sun Microsystems 1.0 - Manual (Page 34)

8 SunFDDI/P 1.0 Adapter User’s Guide—May 1997
2
▼ To Clean the Fiber Optic Cable
1. Gently wipe the end of the ferrule with an alcohol-moistened cotton
swab.
Figure 2-2 Cleaning the End of a Fiber Optic Cable
2. Blow clean, dry compressed air around the end of the connector and
around the ferrule to dislodge loose dust and grit.
3. Clean the adapter by running a pipe cleaner moistened in alcohol running
though it.
Repeat with a dry pipe cleaner.
4. Dry the adapter with clean, dry compressed air.