Sun Microsystems 1.0 - Manual (Page 45)

Installing SunFDDI/P Software 19
3
Your SunFDDI/P station should now be active, and you should be able to send
and receive data across an FDDI connection.
For optimum performance from your FDDI network, you may need to tune the
configurable network parameters. See Chapter 4, “Improving Network
Performance,” for detailed instructions.
If you have problems configuring or using your SunFDDI/P station, see
Chapter 5, “Troubleshooting and Diagnostics,” for help.
▼ Unloading Drivers
The driver for the SunFDDI/P 1.0 adapter can be unloaded while the system is
running by using the
modunload(1M) command. If the SunNet Manager
daemons are running on your system, you must kill that process before you
unload the SunFDDI/P driver.
♦ If SunNet Manager is configured and running on your system:
♦ To unload the SunFDDI/P driver:
% ps -ef | grep pf_snmd
% kill -9 <process IDs from above command>
% modinfo | grep smt
% modunload -i <module ID for smt driver>
% modinfo | grep pf
% modunload -i <module ID for pf driver>