Sun Microsystems 1.0 - Manual (Page 151)

125
Setting Up Servers
and Diskless Clients
11
This chapter describes how to set up a server so that you can boot and run
diskless clients across an FDDI network. It assumes that the server and clients
are attached to the same FDDI ring.
Setting up a server for a diskless client running over FDDI involves these steps:
1. Setting up the server so that it can export an operating system for a diskless
client and installing the SunFDDI/P device driver and utilities
2. Introducing the diskless client to the network
3. Installing the SunFDDI/P device driver in the /export/root /<client> file
system for the diskless client
4. Booting the diskless client over the network
Setting Up a Server and Diskless Clients page 126
Booting a Diskless Client Over SunFDDI/P page 133