Sharp FO-DC535 - Manual (Page 143)

Setting Up Status and Alert Messages
141
4. Netw
or
k
Pr
inter
To set up status and alert messaging, first click Status & Alert E-mail in the
menu at the left of the Web page. Enter a name for the machine, and a
machine code (if desired) and location. For more information on the settings,
click Help at the bottom of the Web page menu.
Next, click Status Message Parameters in the Web page menu. Enter the e-
mail addresses to which status messages are to be sent, and select the
schedule (1 or 2) for sending status messages. Schedules 1 and 2 can be set
up at the bottom of the page.
To set up alert messaging, click Alert Message Parameters in the Web
menu. Enter the e-mail addresses to which alert messages are to be sent,
and select the conditions that will cause an alert message to be sent.