Broadcasting using a group key, Broadcasting 155, Special functions – Sharp FO-DC535 User Manual
Page 157: Load the document(s), Send ready will appear in the display, Resolution contrast
Broadcasting
155
6. Special
Functions
Broadcasting using a Group Key
If the destinations to which you want to broadcast have all been programmed
into one Group Key (see Storing destinations in Group Keys which follows),
you can perform the broadcasting operation using the following simplified
procedure.
♦
When using a Group Key to broadcast to e-mail destinations, the file format
selected in SCAN TO E-MAIL SETUP (page 88 and following) is used if a
file format is not selected in Step 2 below. If the Group Key also contains
fax destinations, only “TIFF-G4” and “PDF-G4” can be used for the format.
1
Load the document(s).
•
SEND READY will appear in the
display.
•
Press
and/or
to
set the resolution and contrast if
needed.
2
Press the appropriate Group Key. If the
key contains only fax destinations,
transmission will begin.
If the key contains e-mail addresses,
you can set e-mail options as
explained in Step 7 of the Broadcasting
procedure. Press
WITHIN 5
SECONDS after pressing the Group
Key.
RESOLUTION
CONTRAST
When broadcasting to fax destinations, a Transaction Report is automatically
printed out after broadcasting is completed. Check the "Note" column of the
report to see if any of the fax destinations are marked "Busy" or have a
communication error code. If so, send the document to those destinations
again.
Q / !
W / "
E / #
R / $
T / %
Y / &
U / '
I / (
O / )
P / =
SYMBOL
A / |
S
D
F
G / {
H / }
J / [
K / ]
L / +
Caps Lock
Z / <
X / >
C
V
B
N / *
M / ?
@
.com
SHIFT
/ ^
/ / \
; / :
Space
_
-
. / ,
DEL
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39