Sharp FO-DC535 - Manual (Page 147)

Printer Driver Settings
145
4. Netw
or
k
Pr
inter
Printer Driver Settings
The print settings that can be selected in the Paper, Page Layout, Quality, and
Options tabs of the printer driver are described below.
Paper tab
Paper Size
Select the paper size to be used for printing.
If the paper size set in the application is different from this setting, the paper
size in the application normally takes precedence.
Fit to Paper
Check Fit to Paper to adjust the size of the image sent from the application to
the paper size specified in Output Paper Size.
Limitations:
When one of following is selected, the "Fit to Paper" function can not be
selected.
Scaling: Any setting except 100%
N-Up: Any setting except Off
All Raster: On
Note: When Fit to Paper is selected, the paper size specified in the
application is not used (the size specified in the Fit to Paper setting is used
instead).
Orientation
Select Portrait or Landscape for the orientation.