Sharp FO-DC535 - Manual (Page 207)

Optional Settings
205
7. Optional
Settings
Setting 14: RECEIVE REDUCE
This setting is used to reduce received documents slightly before printing to
ensure that data on the edges are not cut off. Select AUTO for automatic
reduction or 100% for no reduction. Press or to make the selection
and then press .
♦
Initial setting: AUTO
Setting 15: IMAGE MEMORY PRINT
Select YES to include a copy of the first page of the transmitted document on
the Transaction Report. Select NO to turn the function off. This setting is only
effective when transmitting from memory. Press or to make the
selection and then press .
♦
Initial setting: YES
Setting 16: CASSETTE SELECTION
Note: This setting will only appear if the machine has two paper cassettes, or
if the machine has one paper cassette and Option Setting 31 (Seperate
Mode) is turned off.
Press or to select one of the following settings and then press
.
AUTO SELECTION:The machine automatically selects the printing paper
source (tray or cassette) according to the size of each page received or
copied. (If a document consists of multiple pages of different sizes, each page
will be printed on the paper that best matches its size.)
AUTO SELECTION 2: The machine automatically selects the printing paper
source (tray or cassette) according to the size of the first page of the
document received or copied. (If the document consists of multiple pages of
different sizes, all pages will be printed on the same size of paper based on
the size of the first page.)
MANUAL SELECTION: Use this to set a fixed order of priority for the paper
sources. After selecting this setting, the 1ST PRIORITY setting will appear.
Select the source from which you want paper to be always drawn (regardless
of the size of the received document), and then press . The 2ND
START/
ENTER
START/
ENTER
START/
ENTER
START/
ENTER