Sanyo SANUPS E11A102A - Manual (Page 18)

− 15 −
6.6 Mounting a Rack Mount Type UPS
CAUTION
！
・ Be careful to avoid straining your lower back when moving and installing the UPS.
・ The UPS weighs about 16 kg (35.27 lbs). Always get at least one other person to
help you install it. Bodily injury can result if the UPS falls.
・ The UPS can fall when it is moved or installed, resulting in bodily injury or
damage to the UPS. Hold the bottom side of the UPS firmly with both hands when
installing it.
・ For safety, use L-type rails (support rails) when mounting the UPS in a rack.
(Contact the manufacturer of your rack for more information about L-type rails.)
The UPS is designed for mounting in 19-inch racks only. Refer to §6.3 “Installation Space” and
make sure you secure enough ventilation space in front of and behind the UPS. Do not place
other objects on top of the UPS. Doing so can damage the UPS.
The UPS is heavy, weighing about 16 kg (35.27 lbs). Installation at the very bottom of the
rack is recommended. Always use L-type rails (support rails) when mounting the UPS in a
rack. (Contact the manufacturer of your rack for more information about L-type rails.)
① Attach the supplied rack mounting brackets to the UPS.
There are 2 brackets, 1 for the left and 1 for the right. Refer to the following illustration
and make sure you attach them in the correct direction.
② Mount the UPS in the rack.
6.7 Inserting the Bushings
When you are not using the stand or rack mounting brackets, insert the supplied
bushings into the holes on the UPS.
Left side: 4 locations
① Attach the left and right
rack mounting brackets so
that the large and small
holes are on the bottom.
Right side: 2 locations