Siemens SX1 - Manual (Page 37)

Messages
36
SX1 K1 en, A31008-H6500-A1-3-7619 (13. June 2003, 12:15)
© Siemens AG 2001, O:\Mobil\SX1_(K1)\en\k1gb_messages.fm
Message validity
Select the period in which the serv-
ice centre tries to deliver the mes-
sage:
1 hour, 6 hours, 24 hours, 3 days, 1 week,
Maximum time *
*) Maximum period that the service
provider permits.
Message sent as
Make sure that your service provider
supports the conversion formats (for
information please contact your
service provider).
Text
Normal SMS message.
Fax
Transmission via SMS.
E-mail
Transmission via SMS.
Paging
You may need to obtain
the required code number
from your service
provider.
Preferred connection
You can choose between GSM or
GPRS as default, if supported by the
used network.
Reply via same ctr.
The reply to your message is handled
via your service centre (for informa-
tion please contact your service pro-
vider).
SMS options
Message centre, Edit, Delete, Exit.
Most relevant functions:
Message centresKOptions
K New msg. centre
Press the joystick, write a name
for the new service centre, then
press OK .
Move joystick down and press it.
Write the number of the new short
message centre, then press OK (get
the number from your provider).
To use the new service centre go to
Msg. centre in use and select it.
MMS
Messages KOptionsKSettings
K MMS
Preferred connection
Select the access point to be used as
the preferred connection. To define
a new access point, see Settings
p. 70.