Siemens SX1 - Manual (Page 78)

Setup
77
SX1 K1 en, A31008-H6500-A1-3-7619 (13. June 2003, 12:16)
© Siemens AG 2001, O:\Mobil\SX1_(K1)\en\k1gb_setup.fm
Call divert
You can set the conditions
for which calls are diverted to your
mailbox or other numbers. For de-
tails contact your service provider.
You can set divert as follows:
The most common condition for call
divert is: If not answered
C
K SetupKCall divert
If not answered
Select.
Activate Select, then choose:
To voice mailbox
to divert to your voice
mailbox number (p. 83)
or
To other number
Enter another number to
which calls should be di-
verted.
Select the delay time after which a
call should be diverted.
B Press OK . After a short
pause, the setting is con-
firmed by the network.
Divert conditions
The following conditions for call di-
verting are available:
If not answered, All voice calls, If busy, If
not answered, All voice calls, If not avail-
able, All fax calls, All data calls.
Check status
OptionsKCheck status
Check whether the divert is activated
or not.
Cancel diverts
OptionsKCancel all diverts
All set diverts are cleared.