Samsung CLP-600 - Manual (Page 26)

Using the Control Panel
3.6
WLAN Default
This item performs a simple reset and restores
the factory default for the wireless configuration.
N OTE : This menu only appears when an optional
wired/wireless network interface card has been
installed.
Netware
You can select whether or not to use the Netware
protocol.
If you select On, you can access the Config
Netware menu item.
In the Config Netware menu, you can specify
the frame type parameter used on your network.
Config Netware
You can set this item only when you set
Netware to On. This item lets you select
whether or not you set the frame type parameter.
Select Yes to select the frame type.
If you select Yes, the IPX Frame Type option
appears on the display.
IPX Frame Type
You can select this item only when you set
Config Netware to Yes. This item lets you
select the IPX Frame Type.
• Auto: You can set a frame type automatically.
• EN_8022: Select this value to use the IEEE
802.2 frame type.
• EN_8023: Select this value to use the IEEE
802.3 frame type.
• EN_II: Select this value to use the ETHERNET
II frame type.
• EN_SNAP: Select this value to use the SNAP
frame type.
Reset Network This item reboots the network interface card.
Default Set
This item performs a simple reset and restores
the factory default settings for the network
configuration.
Print Net CFG
This item prints a page showing the network
parameters you have set.
Item Explanation
Options: On, Off
Options: Yes, No
Values: Auto, EN_8022, EN_8023, EN_II,
EN_SNAP