Samsung CLP-600 - Manual (Page 28)

Using Print Materials
4.2
N OTE : Do not use carbonless paper or tracing paper. These
types of paper are unstable at the fusing temperature and can
give off fumes, or cause damage to the printer.
Loading Paper
Proper paper loading helps prevent paper jams and ensures
trouble-free printing. Do not remove the paper tray while a job
is printing. Doing so may cause a paper jam. See “Sizes and
Capacities” on page 4.1 for acceptable paper capacities for
each tray.
C AUTION : This printer does not spport transparencies.
Using Tray1
Load the print material you use for the majority of your print
jobs in Tray1.
Tray1 can hold a maximum of 250 sheets of plain A4 or letter-
sized paper.
You can purchase an optional tray, Tray2, and attach it below
Tray1, to load an additional 500 sheets of paper. See 9.1 for
more information about installing the optional Tray2.
To load paper, pull the tray and the load the paper with the
print side up.
For details about loading paper in the paper tray, see “Loading
Paper” on page 2.4
.
N OTE : If you experience problems with paper feed, place one
sheet at a time in the Multi-purpose Tray.
Using the Optional Tray
The optional tray, Tray2, can hold a maximum of 500 sheets of
plain paper.
To load paper in Tray2, follow the instructions for loading paper
on page 2.4.
Using the Multi-purpose Tray
The Multi-purpose Tray is located on the right side of your
printer. It can be closed when not in use, making the printer
more compact.
The Multi-purpose Tray can hold several sizes and types of
material, such as cards and envelopes. You may also want to
use the Multi-purpose Tray for single page print jobs on
letterhead, colored paper for use as separator sheets, or other
special materials that you do not normally keep in the paper
tray. You can load approximately 100 sheets of plain paper, 10
envelopes, 10 sheets of card stock, or 10 labels at a time.
• Load only one size of print material at a time in the
Multi-purpose Tray.
• To prevent paper jams, do not add paper when there is still
paper in the Multi-purpose Tray. This also applies to other
types of print materials.
• Print materials should be loaded face down with the top edge
going into the Multi-purpose Tray first, and be placed in the
center of the tray.
Multi-purpose Tray