Samsung CLP-600 - Manual (Page 66)

Installing Printer Options
9.1
9
Installing Printer
Options
Your printer is a full-featured laser printer that has been
optimized to meet most of your printing needs. Recognizing
that each user may have different requirements, however,
Samsung makes several options available to enhance the
printer’s capabilities.
This chapter includes:
• Precautions When Installing Printer Options
• Installing an Optional Paper Tray
• Installing a Network Interface Card (CLP-600N Only)
Precautions When Installing
Printer Options
DISCONNECT THE POWER CORD:
Never remove the printer control board while the printer is
plugged in.
To avoid the possibility of an electrical shock, always disconnect
the power cord when installing or removing ANY internal or
external printer option.
DISCHARGE STATIC ELECTRICITY:
The control board and internal printer option, Network
Interface Cards, are sensitive to static electricity. Before
installing or removing an internal option, discharge static
electricity from your body by touching something metal, such
as the metal back plate on any device plugged into a grounded
power source. If you walk round before finishing installation,
discharge any static electricity once again.
Installing an Optional Paper
Tray
You can increase the paper handling capacity of your printer by
installing an optional Tray2. This tray holds 500 sheets of paper.
1
Remove the packing tape and the packing material inside
of the tray.
2
Find the location of the connector and the optional tray
positioners.