Installing a network interface card – Samsung CLP-600 User Manual

Page 67

Advertising
background image

Installing Printer Options

9.2

3

Place the printer over the tray, aligning the feet on the

printer with the positioners on the optional tray.

C

AUTION

: This printer weighs 28.5kg including the toner

cartridges and the cassette. Use safe lifting and handling
techniques. If you need to move the printer, it should be
moved by two people. Use the lifting handles as shown in the

diagram (see page 1.2). Back injury could be caused if a single
person attempts to lift the printer.

4

Plug the tray’s interface cable into the connector on the
left rear of the printer.

After installing Tray2, you must set the tray as installed in the
printer properties window.

1

Click the Windows Start menu.

2

For Windows 98SE/Me/NT 4.0/2000, select

Settings

and

then

Printers

.

For Windows XP/2003, select Printers and Faxes.

3

Select the Samsung CLP-600 Series printer icon.

4

Right-click on the printer icon and select

Properties

.

Lifting handles are

located at the lower

edge of both sides of

the printer.

5

Click the Printer tab, and select Tray2 from the Optional

Tray drop-down list.

6

Click OK.

Installing a Network Interface
Card

(CLP-600N Only)

N

OTE

: This procedures are only for service technicians.

You can use the CLP-600N on a network with the built-in

network interface card.

If you want to use the printer in both wired and wireless
network environments, you need to install an optional wired/

wireless network interface card. Contact your Samsung dealer
or the retailer where you bought your printer. We strongly
recommend that the card be installed by a trained service

professional.

Check to see if there are any missing parts in your optional
interface card package.

N

OTE

: The antenna connected to the wired/wireless network

interface you purchase may not be separate from the card,
depending on your country.

To install a wired/wireless network interface card:

1

Turn the printer power off and unplug all cables from the
printer.

Interface Card Package

Network: Ethernet 10/100 Base TX + 802.11a/b/g Wireless
LAN (Internal)

Order number: CLP-N600B

Contents: wired/Wireless Network interface Card,

Network Utilities CD, Network Printer Quick Guide

Advertising