Samsung CLP-600 - Manual (Page 38)

Maintaining Your Printer
6.5
6
Place the toner cartridge on a flat surface, as shown, and
remove the paper covering the toner cartridge by
removing the tape.
N OTE : If toner gets on your clothing, wipe it off with a dry
cloth and wash it in cold water. Hot water sets toner into
fabric.
7
Make sure that the color of the toner cartridge matches
the color slot and then grasp the handles on the toner
cartridge. Insert the cartridge until it clicks into place.
8
Close the access door. Make sure that the door is securely
latched, and then turn the printer on.
C AUTION : If the access door is not completely closed, the
printer will not operate.
Replacing the Paper Transfer
Belt
The life of the paper transfer belt is approximately 35,000 black
and color pages. When the life span of the paper transfer belt
has expired, the printer will stop printing until a new paper
transfer belt is placed into the printer.
The SmartPanel program window appears on the computer,
indicating the paper transfer belt needs to be replaced. Also, if
you use the CLP-600N, the display on the control panel shows
the error message, “Replace Transfer Belt”. At this stage,
replace the paper transfer belt.
N OTE : The life span of the paper transfer belt May be affected
by operating environment, printing interval, media type, and
media size.
To replace the paper transfer belt:
1 Turn the printer off, then wait a few minutes for the printer
to cool.
2
Using the handle, completely open the access door.
C AUTION :
• Do not touch the green surface, the OPC drum, on the front
of each toner cartridge with your hands or any other
material. Use the handle on each cartridge in order to avoid
touching this area.
• If you leave the access door open for more than a few
minutes, the OPC drum can be exposed to light. This will
cause damage to the OPC drum. Close the access door
should the installation need to be halted for any reason.