Samsung CLP-600 - Manual (Page 49)

Solving Problems
7.7
6
After removing the jammed paper, check for paper which
may be jammed in other parts of the printer.
7
After making sure that the access door is open, close the
top cover. Make sure that it is securely latched.
8
Close the access door firmly. The printer will resume
printing.
C AUTION : If the top cover and access door are not completely
closed, the printer will not operate.
In the Paper Exit Area
If paper is jammed in the paper exit area, a lamp turns on at
the corresponding location on the Status map. If you use the
CLP-600N, “Jam In Exit Area” also appears on the display.
1
If a long portion of the paper is visible, pull it straight out.
Open and close the access door firmly. The printer will
resume printing.
If you cannot find the jammed paper, or if there is any
resistance removing the paper, stop pulling and go to step
2.
2
Using the handle, completely open the access door.
C AUTION :
• Do not touch the green surface, the OPC drum, on the front
of each toner cartridge with your hands or any other
material. Use the handle on each cartridge in order to avoid
touching this area.
• Be careful not to scratch the surface of the paper transfer
belt.
• If you leave the access door open for more than a few
minutes, the OPC drum can be exposed to light. This will
cause damage to the OPC drum. Close the access door
should the installation need to be halted for any reason.
3
Open the top cover.