Standard Horizon QUEST+ GX1256S - Manual (Page 13)

GX1256S Page 13
4.4 CONNECTION OF GPS WITH NMEA OUTPUT
Additional Information:
•
The GPS must have the NMEA Output turned on and set to 4800 Baud
in the setup menu. If there is a selection for parity select none.
• For further information on interfacing /setting up your GPS. Please con-
tact the manufacturer of the GPS receiver.
• QUEST+ is corresponded with following NMEA sentence:
• NMEA-0183 version 2.0 or higher
• GLL, GGA, RMC and GNS (RMC sentence is recommended)
If you have further inquires, please feel free to contact us at:
Phone: (800) 767-2450
Web site: standardhorizon.com
Email: [email protected]
4.5 CHECKING GPS CONNECTION
After connections have been made between the QUEST+ and the GPS, a
small satellite icon will appear on the top right corner of the LCD display. To
see additional GPS information press and hold the [H/L(POS)] key until the
QUEST+ shows the Latitude and Longitude.
NOTE
The QUEST+ may be setup to show Lat/Lon or time received from a
connected GPS. To setup and show time refer to Section 6.18.
Manufacturer/Model
Lowrance Portable
Magellan Fixed Mount
Magellan Portable
Northstar
Raytheon 420
Raytheon 520 / 620
Raytheon RL SERIES
Simrad
Sitex Neptune, Nautilus
Wires
Orange
Black (GND)
Gray
Black (GND)
Orange
Black (GND)
Yellow
Black (GND)
Yellow
Brown
Blue
Brown
White
Brown
White
Brown
Gray
Brown
QUEST+
Blue
Green
Blue
Green
Blue
Green
Blue
Green
Blue
Green
Blue
Green
Blue
Green
Blue
Green
Blue
Green
Wires
Green
Blue
Brown
White
Blue
White
Black
Blue
Black (GND)
Brown
Black (GND)
Yellow
Green
Green
Black
White
Black
White
Black (GND)
Manufacturer/Model
STANDARD HORIZON
Furuno GP30, 36
Furuno GP1650, 1850
Garmin Fixed Mounts
Garmin Portables
JRC GPS500
JRC 100 SERIES
JRC 200 SERIES
Lowrance Fixed Mount
QUEST+
Green
Gray
Blue
Blue
Green
Blue
Green
Blue
Green
Blue
Green
Blue
Green
Blue
Green
Blue
Green
Blue
Green