Standard Horizon QUEST+ GX1256S - Manual (Page 55)

GX1256S Page 55
9.3 DSC/RADIO SETUP MODE
The CMP25 can access the DSC / RADIO setup menu (refer to section 7
“DIGITAL SELECTIVE CALLING” and section 8 “RADIO SETUP MODE” for
details). However, the LAMP, CONTRAST, and KEY BEEP menu item which
is accessed from the CMP25 only controls the CMP25’s display and speaker.
DSC/RADIO Setup mode from the CMP25:
1. Press and hold down the [CALL/SET] key until “RADIO SETUP” menu
appears.
2. Press the [ ]/[ ] key to select “RADIO SET” or “DSC SETUP” menu.
3. Press the [CALL/SET] key, then select the menu item you wish to work
on by pressing the [ ]/[ ] key.
4. Press the [CALL/SET] key.
5. Press the [
]/[ ] key to change the value or condition for the menu
item, then press the [CALL/SET] key to save the new setting.
6. Press the [ ]/[ ] key to select “EXIT,” then press the [CALL/SET] key
to return to the normal operation.
RADIO SETUP-menu DSC SETUP-menu