Standard Horizon QUEST+ GX1256S - Manual (Page 30)

GX1256S Page 30
7.2 DSC SCAN
When the radio is shipped from the factory it is programmed so CH70 (the
DSC channel) is scanned at all times. There is a selection in the SETUP
MENU to disable the DSC SCAN. However, turning off DSC SCAN will dis-
able the radio from receiving DSC calls i.e.: Individual Call, All Ships Call,
Distress Call and Position Requests. If you want to use any of the functions
the selection must be left ON.
To Change DSC SCAN Method:
1. Press and hold down the [CALL/SET(MENU)] key until
“RADIO SETUP” appears.
2. Press the [DOWN] key to select “DSC SETUP.”
3. Press the [CALL/SET(MENU)] key, then press the [UP]
or [DOWN] key to select “DSC SCAN.”
4. Press the [CALL/SET(MENU)] key to enable setting this
item (The number in the display will flash).
5. Press the [UP] or [DOWN] key to select “on” or “oF (off).”
6. Press the [CALL/SET(MENU)] key to store the selected
setting.
7. Press the [UP] or [DOWN] key to select “EXIT,” then
press the [CALL/SET(MENU)] key.
8. Press the [UP] or [DOWN] key to select “EXIT,” then
press the [CALL/SET(MENU)] key to return to the nor-
mal operation.