Standard Horizon QUEST+ GX1256S - Manual (Page 37)

GX1256S Page 37
press the [CALL/SET(MENU)] key.
8. Press the [UP] or [DOWN] key to select “EXIT,” then
press the [CALL/SET(MENU)] key to return to the nor-
mal operation.
7.7.3 Setting up Individual Call Ringer
When a Individual call is received the radio will produce a ringing tone for 3
minutes. This selection allows the Individual Call ringer time to be changed.
1. Press and hold down the [CALL/SET(MENU)] key until
“RADIO SETUP” appears.
2. Press the [DOWN] key to select “DSC SETUP.”
3. Press the [CALL/SET(MENU)] key, then press the [UP]
or [DOWN] key to select “INDIVIDUAL RINGER.”
4. Press the [CALL/SET(MENU)] key to enable setting this
item.
5. Press the [UP] or [DOWN] key to select ringing time of a
INDIVIDUAL CALL.
4: 3 minutes continuously
3: 15 times
2: 10 times
1: 5 times
6. Press the [CALL/SET(MENU)] key to store the selected
ringing time.
7. Press the [UP] or [DOWN] key to select “EXIT,” then
press the [CALL/SET(MENU)] key.
8. Press the [UP] or [DOWN] key to select “EXIT,” then
press the [CALL/SET(MENU)] key to return to the nor-
mal operation.
7.7.4 Transmitting an Individual Call
This feature allows the user to contact another vessel with a DSC radio. This
feature is similar to calling a vessel on CH16 and requesting to go to an-
other channel. Select the traffic channel for voice communication.
1. Select the traffic channel for voice communication.
2. Press the [CALL/SET(MENU)] key.
3. Press the [CALL/SET(MENU)] key again. The individual
address will appear.
4. Press the [UP] or [DOWN] key to select the individual you want to con-