Standard Horizon QUEST+ GX1256S - Manual (Page 49)

GX1256S Page 49
8.5 CHANNEL NAME CHANGE
1. Press and hold down the [CALL/SET(MENU)] key until
“RADIO SETUP” appears.
2. Press the [CALL/SET(MENU)] key, then press the
[DOWN] key to select “CH NAME.”
3. Press the [CALL/SET(MENU)] key, then press the [UP]
or [DOWN] key to select the channel on which you wish
to change a name.
4. Press the [CALL/SET(MENU)] key to enable adjusting
this item.
5. Press the [UP] or [DOWN] key to select the first charac-
ter (letter, number, or symbol) in the name you wish to
store, the press the [CALL/SET(MENU)] key to move to
the next character.
6. If you make a mistake, press the [H/L(POS)] key to move
back, then re-select the correct letter, number, or sym-
bol.
7. Repeat step 5 as many times as necessary to complete
the name tag (up to 12 characters).
8. Press and hold the [CALL/SET(MENU)] key to store the
new name.
9. Press the [DOWN] key to select “EXIT,” then press the
[CALL/SET(MENU)] key.
10. Press the [DOWN] key to select “EXIT,” then press the
[CALL/SET(MENU)] key to return to the normal opera-
tion.