Sanyo VCC-MC600P - Manual (Page 25)

Lens Settings (LENS)
24
You can select zooming speed to target object and
magnification power of electronic zoom.
1 Use the joystick lever (xy) to select [ZOOM] – “SET
y
”, and press the [ENTER] button.
The ZOOM SETTING screen appears.
2 Use the joystick lever (xy) to select [SPEED] and
use the lever (vw) to select zooming speed.
Available settings: 1, 2, 3, 4 (The larger the value, the faster
the zooming speed.)
3 Use the joystick lever (xy) to select [EL ZOOM] and
use the lever (vw) to select magnification power of
electronic zoom.
The electronic zooming activates when an zooming operation
goes beyond the maximum magnification power of optical
zoom.
Available settings: OFF (Electronic zoom is turned off.)
x2, x4, x8, x16
4 Use the joystick lever (xy) to select [V-RESO.UP]
and use the lever (vw) to select a vertical
resolution.
Available settings:
• ON: Improves vertical resolution while using the
electronic zoom.
• OFF: Does not improve vertical resolution while using the
electronic zoom.
Memo: When the vertical resolution improvement is set to “ON”,
moving target objects will cause conspicuous afterimages
and blurs.
☞
After completing setting, use the lever to move the cursor to
[MENU] and select “BACK” or “END”.
B Setting the zooming operations (ZOOM)
In the following condition, the vertical resolution
improvement (V-RESO.UP) will be set to “OFF”
automatically.
• When the electronic sensitivity setting (SENSE UP) is
set to “ON” in the auto iris setting (AUTO).
• When the electronic shutter setting (SHUTTER) is set
to “LONG” (Slow shutter speed mode).
• When the digital noise reduction setting (DNR) is set
to “ON” in the auto gain control setting (AGC).
LENS
FOCUS
y
ZOOM y
AUTO
SET
ZOOM SETTING
SPEED
EL ZOOM
V-RESO.UP
3
OFF
OFF
L5BU2_XE(VCC-MC600P_MC500P)(GB).book 24 ページ ２００７年１月１８日 木曜日 午前９時４４分