Sanyo VCC-MC600P - Manual (Page 7)

6
About Setting Menus
b Setting menu mode
For performing settings in the menu, the following two menu modes are available.
● Main menu
This menu, which is provided for general users, appears by pressing the [MENU] button in the CAMERA MENU CONTROL screen. Some menu
items and setting options, which are available in the advanced menu, are omitted in the main menu.
● Advanced menu
This menu, which is provided for administrative users, appears by selecting [ADVANCED MENU] in the main menu. In the advanced menu, the
menu items for the [ALARM] and [PRIVACY MASK] settings are added and advanced settings can be made on individual menu screens.
Memo: • In the advanced menu, the vertical line is displayed on the left end of the screen.
• The settings common to the main menu and advanced menu modes are shared regardless of the menu mode in which the settings are
made. However, different passwords can be specified for the main menu and advanced menu respectively.
☞
The description in this manual assumes the advanced menu.
When the password lock is enabled, you have to enter your password before displaying the main menu by pressing the [MENU] button. To enter
your password, perform the following procedures.
1 Use the joystick lever (vw) to select the digit and
use the lever (
xy ) to select a number.
The PASSWORD screen appears.
2 After entering your four-digit password, press
[ENTER].
If the password is authenticated, the menu screen appears.
CAMERA
LENS
PAN/TILT
AUTO MODE
PASSWORD
LANGUAGE
OPTION
ADVANCED MENU
PRESET
MENU
SET
SET
SET
SET
SET
SET
SET
SET
OFF
END
y
y
y
y
y
y
y
y
CAMERA y
LENS y
PAN/TILT y
AUTO MODE y
ALARM y
PRIVACY MASK y
PASSWORD y
LANGUAGE y
OPTION y
PRESET
MENU
MENU
SET
SET
SET
SET
SET
SET
SET
SET
SET
OFF
BACK
<Main menu> <Advanced menu>
Entering password
****
y
MENU
PASSWORD
SET
BACK
• If an invalid password is entered, “NG” appears and
the cursor moves to [BACK]. If you entered invalid
password three consecutive times, the password
entry field disappears.
• The factory setting value for password is “1234”. To
keep the camera system secured, change your
password regularly.
L5BU2_XE(VCC-MC600P_MC500P)(GB).book 6 ページ ２００７年１月１８日 木曜日 午前９時４４分